8
Technology that Works
The Art Of Relaxation
4. Pre-Programmed Functions
Your massage system is equipped with 3 pre-programmed functions for your enjoyment:
Wave:
Offers complete head to toe massage by operating each selected zones in turn starting at the top back
(zone 1) and working through to the calves (zone 5) and then back to zone 1. This programme can be
operated at any level at any speed (See Section 5). You can also de-select any zone by pressing the
zone button (see 2 above) that zone will then be omitted from the wave cycle. To re-select an omitted
zone just press the zone button again.
Pressing the Wave button again will return you to the manual zone select option (see 2 above).
Tap:
On activation all selected zones are operated together in short bursts of massage. Tap can be used
on any combination of zones or all 5 zones at once. This programme can also be adjusted to operate
at any level of intensity and at any speed (See Sections 3 & 5). You can also de-select any zone by
pressing the zone button (see 2 above) that zone will then be omitted from the Tap cycle. To re-select
an omitted zone just press the zone button again.
Pressing the Tap button again will return you to the manual zone select option (see 2 above).
Swell:
Offers a rolling massage, each zone sequentially vibrating from minimum to maximum selected
intensity. Swell can be used on any combination of zones or all 5 zones at once. Swell can also be
adjusted to operate at any level of intensity and at any speed (See Sections 3 & 5). You de-select a
zone by pressing the zone button (see 2 above) that zone will then be omitted from the Swell cycle. To
re-select an omitted zone just press the zone button again.
Pressing the Swell button again will return you to the manual zone select option (see 2 above).
5. Speed
The speed selector only works when the Wave, Tap or Swell pre-programmed functions are selected.
The speed selection offers varying speeds from slow to fast. Press the Speed + button to increase
speed and the Speed – button to reduce speed. The LCD display will confirm the speed level selected.
6. Heat - & +
These buttons control the heat pad which offers heat to the lumbar region.
Press the Heat + button to activate the heat pad, the LCD display will change to confirm that the heat
has been switched on. Press the Heat – button to turn the heat pad off. The LCD display will change
to confirm that the heat pad is turned off.
The heat pad is fitted with a pre-set thermostat which, once the pad attains its operating temperature,
cycles on and off to maintain the pre-set level of heat. The pad automatically switches off after 15
minutes use.
