Comet VA-250 Instruction And Assembly Manual Download Page 4

Note   &  Remarks   on  handling and  driving:

 

•  Never touch or adjust the antenna while transmitting. Otherwise, severe

 

injuries including burn may result.  

•  When a lightning is observed, stop operating with the antenna. Don't touch

 

a coaxial cable and so on because it is sometimes struck by electricity.  

•  Please confirm tight fastening of connector and screws, etc. of antenna.

 

Loosening and falling off will lead to personal injury and property damage. 

•   Please adjust antenna correctly. Irregular VSWR will lead to heat-up,

 

break-down or power-down of antenna.

 

Note   &  for  operation:

 

• This antenna is for amateur radio and Broad Band receipt operator. Do not

 

use other than for the purpose of antenna.  

• Please use this antenna within the standard and specifications described in

 

this manual. Failure to this may cause heat up and break down of the unit.  

• Whatever damage and the malfunction which is due to the repair and the

 

reorganization at end-user itself occur, it doesn't take the responsibility.

 

• Recommend antenna coupler combination when you transmit in 3.5~14MHz band.  

Be careful of the transmitting power, time because it is being based on the power at  
the time of the intermittent transmit.

 

[Maintenance]

 

• If mal-function is occurred, stop operation and try to find the reason. If it is not settled, 

please contact the store/shop where you purchased the antenna or our Engineering 
Department.

 

•  Before the practical use when transmitting, please check the VSWE is less than 1.5 at 

your operating frequency.

 

•  Routinely, please confirm tight fastening of each Screws, clamp, etc.

 

[ Customer  Service ]

 

•  Replacement parts and accessories are available at our dealer and our factory.

 

• This quality product is manufactured under strict quality control.

 

contact the store/shop for those damaged by transportation.  

• For further information about assembling work and other technical matters, please 
contact to our Engineering Department.

 

Reviews: