4
IE-SNC-T81(2)xx-01
Device demounting
If there is necessary demount the device, insert flat bladed screwdriver max. 3.5 mm wide from
top side into middle device’s air hole. There is fastening member placed, insert screwdriver beyond
the fastening member about 2 cm deep. Then slightly move screwdriver in arrow direction, it unlock
fastening member and the device is partially opened. Remove the screwdriver and take front part of
device at top.Pull front part with pendulum motion and remove front cover. If there is necessary
remove rear part of the device, please disconnect cables and unscrew two holding screws.
Dimensions
