Comet 9302 0001, Instructions And Operating Manual, Page: 41 / 76

Instructions and operating manual sweeper CSW 1200 B - CSW 1200 G (translated from original instructions)
pag. 41
u
HOUR COUNTER:
Part. 9
Makes it visible the number of hours worked by the machine.
EQUIPMENT ON THE CSW 1200 G CONTROL PANEL
1) Start lever
2) Accelerator lever
3) Filter buzzer button
4) Acoustic indicator button
5) Hour counter
6) Working light switch (optional)
7) Ignition key
u
START LEVER:
Part. 1
It is needed for “cold” ignition of the machine. It is positioned in “up” posi-
tion. After the ignition it must be slowly brought back.
u
ACCELERATOR LEVER:
Part. 2
It controls the number of motor’s rotations.
u
FILTER BUZZER BUTTON:
Part. 3 This buzzer cleans the suction filters through a motor-vibrator Part. 2 Fig.
5;
it must be pressed at least 6 / 7 times for 8 / 10 seconds each (operation to be
performed before starting work, before emptying the bin and with the motor off);
to perform this operation with motor running, close the suction by pulling the
knob
Part. 1 Fig. 6.
u
ACOUSTIC INDICATOR BUTTON:
Part. 4
By pressing this button the acoustic indicator switches on.
u
HOUR COUNTER:
Part. 5
Makes it visible the number of hours worked by the machine.
u
WORKING LIGHT SWITCH (optional):
Part. 6
It activates the adjustable working light.
u
IGNITION KEY:
Part. 7
It activates the switchboard and in particular the movement potentiometer. It is therefore possible to
move the machine without have it working.
CSW 1200 G
Fig. 10