INSTRUCTIONS FOR THE USER
38
OPERATION AND USE
1)Before washing make sure that:
•
the wall-mounted on/off switch is switched on;
•
the water tap is open;
•
water is present in the distribution network;
•
the pump protection filters are installed in their respective positions;
•
the overflow in inserted;
•
all rotating parts are free;
•
the rinse aid dispenser is full;
•
make sure that dishware is in good conditions as it may cause cleaning
difficulty and haven bacteria.
2)Set switch "A" to position 1 to enable the automatic wash tank filling and
the consequent triggering of the heating element. The lamp “B” is on.
3)As soon as visual indicator "C" is ON, pour about 30 gr. of detergent
directly into the tank, paying attention to distribute it uniformly on the filters,
the quantity being according to supplier's instructions. Add 15 gr. every 7
cycles to achieve a concentration of 1,5 gr./lt. In order to respect our
environment, use only the correct amount of detergent.
When using chlorinated detergent, it is suggested to use an automatic
dispenser; otherwise, brownish spots might appear on the surfaces due to
chlorine reactions. Detergent should always be placed near the pump filter.
4)Then, introduce the glasses or the cups to wash, after having removed the
solid waste and having placed them into the proper racks. The cups and the
glasses should be turned upside down, while the cutlery should be put
vertically into the proper container, and the same applies to dishware.
5)By means of switch “A” select the wash cycle according to conditions of the
dishware:
•
with glasses or cups select the short cycle (pos.1)
•
with normally dirty dishes or cutlery select the medium cycle (pos.2)
•
with particularly dirty dishes or deep dishes select the long cycle (pos.3)
A manual wash and rinse is possible by operating main switch "A" in the
respective positions "5" and "4". Excessive use of the manual rinse may lead
to the cooling of the water in the tank causing problems while washing and
subsequently with drying. For that reason ensure that the dishwasher is
attended while the manual rinse is working (we recommend max. time of 30
seconds).
