EN
12
BUTTONS
AUDIO MODULE
•
Button:
select the button to program, referring to the images
•
Function:
this option is used to assign a different action to each module button
◊
None:
no action (default)
◊
Light-me:
this option is used to activate the LIGHT-ME function for the selected button
◊
Audio call:
when the button is pressed, an audio call is made to the address entered in the
“Address”
field (from 1 to 240). The
“Number of calls”
field also appears, in which you can select the number of
calls to make to the address entered in the
“Address”
field (System settings or from 1 to 10)
◊
Local output control:
when the button is pressed, the output set in the
“Output”
field is activated (SE
output for the module or Relay output for the module)
◊
Actuator control:
when the button is pressed, the actuator with the address entered in the “Address”
field is activated
◊
Control on Ultra bus (UDB):
activates the relay on the Module keypad specified in the “Device type”
field (UDB output type: Relay 1 or Relay 2)
OUTPUTS
SE OUTPUT
•
Function:
select the command which activates the SE output for the audio module
◊
Lock-release:
every lock-release command activates the output
◊
Actuator control:
every actuator command with the address set in the
“Address sent to external unit”
field activates the output
◊
Call sent:
every call sent activates the output
•
Activation
◊
Local output control
(non-editable)
•
Local output type
◊
SE
(non-editable)
•
Enable Tones:
a confirmation tone is emitted when the output is activated for the time period set in the
“Activation time (sec.)”
field
RELAY OUTPUT
•
Function:
select the command which activates the Relay output for the audio module
◊
Lock-release:
every lock-release command activates the output
◊
Actuator control:
every actuator command with the address set in the
“Address sent to external unit”
field activates the output
◊
Call sent:
every call sent activates the output
BUTTON MODULE TYPE
•
Button module type:
select the button module model, UT9200 (default) or 3063U
MODULES
•
Button:
select the button to program, referring to the images
•
Function:
this option is used to assign a different action to each module button
◊
None:
no action (default)
◊
Audio call:
when the button is pressed, an audio call is made to the address entered in the “Address”
field (from 1 to 240). The “Number of calls” field also appears, in which you can select the number of
calls to make to the address entered in the “Address” field (System settings or from 1 to 10)
◊
Local output control:
when the button is pressed, the output set in the “Output” field is activated (SE
output for the module or Relay output for the module)
◊
Actuator control:
when the button is pressed, the actuator with the address entered in the “Address”
field is activated
◊
Control on Ultra bus (UDB):
activates the relay on the Module keypad specified in the “Device type”
field (UDB output type: Relay 1 or Relay 2)
Summary of Contents for UT1010
Page 51: ...51 ...
