Comelit HUB32LCD, User Manual

Page: 5 / 12

5
Accessing the menu
Enter user code (default: 111111)
Arming the alarm system
Enter user code (default: 111111)
Forced arming
If open zones or faults are detected during the system arming procedure, the user will be asked to choose whether to proceed with a forced arming command or
to abandon the procedure. If “Enter” is pressed the system will proceed with forced arming and will arm according to the “Forced arm options”. You can also scroll
through the list of conditions to force using the down arrow.
The user menu is accessed by entering the user code followed by the down arrow. A guide to all user menu options is available online. See the chapter “Available
documentation”.
The system can be armed in various ways: total arm, part arm 1 and part arm 2.
Total arming is used when you are leaving the premises. In this arming condition, the whole system is armed and all detectors trigger an alarm if violated according
to their confi guration. Note that some devices, such as fl ooding and smoke detectors, trigger an alarm regardless of the arming status.
Part arms 1 and 2 allow the user to arm parts of the system while they are still occupying other parts. For example, all window detectors can be armed, leaving the
indoor motion detectors disarmed. This allows the user to move freely around the rooms while the whole perimeter of the property is monitored. There are three
arming buttons on the keypad assigned by default to these arming modes.
A delay can be set on some detectors, to allow the user to leave the premises following an arming command or to enter the premises and disarm the system. Ask
your installer for more information.
Disarming the alarm system
The alarm system can be disarmed using the keypad, by entering the user code and pressing the open padlock icon in the bottom right-hand corner. An audible
confi rmation tone and the text “Disarmed” confi rm that disarming has taken place.
Flashing