4
The front panel
1
2
3
4
5
6
7
1. 16 x 2-character LCD.
2. LED indicators: green, orange, red.
3. Alphanumeric
keypad.
4. Arming/disarming
buttons.
5. Back/Cancel/Delete
button.
6. Enter/Confi rm button.
7. Navigation keypad / menu button.
•
Green LED: indicates the system is armed
(lit steadily) or in
“not ready to arm” condition (fl ashing). The LED is off if the
system is ready for arming.
•
Orange LED: indicates a fault (lit steadily) or isolated /
bypassed zones (fl ashing).
•
Red LED: indicates an alarm / tampering in progress (lit
steadily) or an alarm in the memory (fl ashing).
Viewing the system status
System ready to arm - Single area
System armed - Single area
System not ready to arm - Single area
Flashing
System ready to arm - 4 areas
System armed - 4 areas
System not ready to arm - 4 areas
Flashing for areas not ready to arm
Exit delay - single area
Entry delay - single area
Entry and exit delay - 4 areas
Countdown
The control panel has a display that can show the system status. The pictures below illustrate the various messages based on the system status.
The messages on the display change depending on whether the system is used to monitor a single area or several areas. In the latter case (multi-area), the bottom
line of the display is divided into four to display the status of each individual area (only existing areas are actually shown). See below for the diff erences between
single area and multi-area displays:
Countdown
Countdown
System part armed - Single area
System part armed - 4 areas
Summary of Contents for HUB32LCD
Page 11: ...11...
