23
EN
4.2.3.4 HOW TO PROGRAM THE
SELF IGNITION FUNCTION
Example: key
√
Take note of the S1 setting and restore it when programming is complete
1
Enter programming mode
f
Set S2 DIP switch 5-6 to the combination 01
» the Privacy LED flashes
2
2.1 Choose the function:
“4.2.1 Preset functions table” on page 20
and select a
S2
DIP switches combination in which the self ignition function (
AI
) is listed for the keys you wish
to program.
Example: 0110
2.2 Addressing:
f
for self-ignition function
don't set S1 DIP switches
3
Select the key to be associated with the function
f
Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4
Exit programming mode
f
To exit programming mode, set S2 DIP switches 5-6 to the combination 00
» the Privacy LED switches off
5
When programming is complete,
f
Set
S2
DIP switches 1-2-3-4 to the combination 1111 (
PROG
setting). In this DIP switch setting,
the keys control the programmed functions; the NON-programmed keys control functions
“4.2.1 Preset functions table” on page 20
f
Restore the user code setting on S1.
4.2.3.5 HOW TO PROGRAM THE
DOCTOR FUNCTION
Example: key
√
Take note of the S1 setting and restore it when programming is complete
1
Enter programming mode
f
Set S2 DIP switch 5-6 to the combination 01
» the Privacy LED flashes
2
2.1 Choose the function:
refer to
“4.2.1 Preset functions table” on page 20
and select a
S2
DIP
switches combination in which the Doctor function (
D
) is listed for the keys you wish to program.
Example: 0110
2.2 Addressing:
f
for Doctor function
don't set S1 DIP switches
3
Select the key to be associated with the function
f
Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4
Exit programming mode
f
To exit programming mode, set
S2
DIP switches 5-6 to the combination 00
» the Privacy LED switches off
5
When programming is complete,
f
Set
S2
DIP switches 1-2-3-4 to the combination 1111 (
PROG
setting). In this DIP switch setting,
the keys control the programmed functions; the NON-programmed keys control functions
“4.2.1 Preset functions table” on page 20
f
Restore the user code setting on S1.
