ANPR922M3M user manual
– 1
st
ed.
3. Preview
3.1 Main stream and Sub-stream Switching
1.Main stream and sub-stream switching. As is shown in picture 3-1 in the red region,
click
button to switch into main stream and click
button to
switch into sub-stream.
(Picture: 3-1)
3.2 Prompt Alarm
1. Prompt alarm. As is shown picture 3-2 in the red region, set the region and time for
motion detection as well as the time for detector alarming, prompt alarm will happen
in the fitful time after alarming issues are activated. Detector alarming and motion
detection have three states for each,
means detector alarming is not set,
means detector alarming has been set.
when this 5 sas5o55 flickering, it means
detector alarming is going on;
means motion detection is not set,
means
motion detection has been set.
when this button twinkles, it means motion
detection is alarming.
(Note: to enable this feature, verify if your IPC model have alarm/motion functions)
5
Summary of Contents for ANPR922M3M
Page 40: ......
