■
To Receive Wireless A/V Signals with TV or DVR
1. Connect TV and receiver using the provided “3.5 Stereo plug to
RCA cable”. Plug RCA to TV input and 3.5 Stereo plug to “AV
OUTPUT ” jack of the receiver.
2. Plug one end of the power adapter into the back of the receiver
and the other end into any 230-volt wall outlet. Use only the
adapter provided.
3. Connect the 2.4GHz antenna to the “ANT.” socket of the receiver.
4. Turn on the power switch of the receiver.
5. If you want record all of the audio and video signal with your
DVR or VCR, you can use the other 3.5 stereo plug to RCA
cable to connect the “RECORD” port of receiver.
If your TV or VCR only has SCART socket for video input, you
can use a SCART/RCA adapter (not included) to convert the
RCA plug to SCART plug.
E. Troubleshooting, Care and maintenance
Please read this owner's manual carefully and follow the steps
described in it. If you still have difficulties, consult the following
table. It will guide you though the most common problems and their
solutions.
Problem
Possible solutions
No picture
or sound
•
Check all cable connections.
•
Make sure power plugs are pushed all the way in.
•
Check power switches on the remote TV and
Video source. (VCR, laser disc player, satellite
receiver, ect. )
•
Check the power on/off switches on the
transmitter and receiver.
Interference:
Noisy
picture
•
Adjust receiver and transmitter bar antenna
orientation.
•
Select a different channel by pushing the channel
selector button on both transmitter bar and receiver so
that the channels match.
•
If using a microwave oven, turn it off.
•
Remove microwave oven from path between
transmitter bar and receiver.
F. Specifications
Transmitter:
Operating Frequency Band 2.400GHz~2.4835GHz
Transmit power output 10dBm (CE),
Modulation FM
Video Input Level 1V p-p
＠
75 ohm
Audio Input Level 1V p-p
＠
600 ohm
Antenna Omni-directional
Power consumption 5V DC, 300mA
Dimension 56 x 63 x 19 mm (H antenna = 74 mm)
Receiver:
Operating Frequency Band 2.400GHz~2.4835GHz
Sensitivity -80dBm MIN.
Video Output Level 1
±
0.2V p-p
＠
75 ohm
Audio Output Level 1
±
0.2V p-p
＠
600 ohm
Antenna Omni-directional
Power consumption 5V DC, 300mA
Dimension 56 x 63 x 19 mm (H antenna = 74 mm)
System:
Operational range up to 100 meter (line of sight)
Operating temperature 10°C~50°C (14 F~122 F)
●
All specification subject to change without notice
