2.4GHz antenna
REAR VIEW FOR TRANSMITTER
CH4 (NTSC only)
\
REAR VIEW FOR RECEIVER
D. Setting Up
Setting up the channel of the transmitter
and the receiver by push the
channel switch , When channel no. of the receiver same as the
transmitter ,
Channel list
CH1
CH2
CH3
CH4
■
To Transmit A/V from Your VCR
1. Connect VCR and transmitter using the provided “3.5 Stereo
plug to RCA cable”. Plug RCA to VCR output jack and 3.5
Stereo plug to “AV INPUT ” jack of the transmitter.
2. Plug one end of the power adapter into the back of the
transmitter and the other end into any 230-volt wall outlet. Use
only the adapter provided.
3. Connect the 2.4GHz antenna to the “ANT.” socket of the
transmitter.
4. Turn on the power switch of the transmitter
5. If you have a near TV or monitor, you can use the other 3.5
Stereo plug to RCA cable (don’t include in this set) to connect
monitor port of transmitter.
If your VCR only has SCART socket for video output, you can
use a SCART/RCA adapter (not included) to convert the RCA
plug to SCART plug.
1 2
ON
1 2
ON
1 2
ON
1 2
ON
AV input
Power input
AV output
for monitor
Power input
AV output 2
2.4GHz antenna
AV output 1
