Comelit 40797, User Manual, Page: 35 / 48

29
3.9 Dome Setup Menu
DOME SETUP MENU
TILT AUTO FLIP: ON
485-TERMINATION: OFF
ACKNOWLEDGE: ON
AUTO CALIBRATION
PASSWORD
OSD DISPLAY
HOME FUNCTION
INITIALIZE DOME
DOME INFORMATION
SAVE AND EXIT
EXIT
/ : move cursor up and down.
/ : move cursor left and right or select or change values.
/
ESC
: exit current menu.
3.9-1 Tilt Auto Flip
Allows the dome camera to automatically turn 180 degrees when the
camera tilts to its lowest position.
When the camera reaches the floor 90 degree tilt down, it will stop.
Release the joystick handle instantly and then pull down to run the flip
function. The tracking speed will be the same as previous.
3.9-2 485-Termination
The device which in connected at end of line, whether it be a dome camera
or keyboard controller, must have the cable for communication terminated
by setting this menu. Without proper termination, there is potential for
control signal errors. Total length of the cable for communication should not
exceed 1.2km.
3.9-3 Acknowledge
If you select ON, acknowledge will be send to Keyboard or DVR and so on.
If you select OFF, there is no acknowledge.