Comelit 40797, User Manual, Page: 24 / 48

18
3.6 Area Title Menu
AREA TITLE MENU
AREA: 1
TITLE: AREA1======
START POINT: 000.0
END POINT: 045.0
SAVE
EXIT
/ : move cursor up and down.
/ : move cursor left and right or select or change values.
: change character at TITLE:
/
ESC
: exit current menu.
3.6-1 Set Area Titles
Each area title has default value. There are 8 Area titles that are dividing
360 degrees into 8 equal parts.
1. To modify to another value, move to START POINT: and press
IRIS OPEN or CTRL button to move the position of the dome then the
message “CONTROL” displays on the screen.
2. Move the dome to desired starting point of Area Title range and set start
point.
3. Press IRIS CLOSE or release CTRL button then the message of
“CONTROL” disappears on the screen.
4. The END POINT is the same as the START POINT. But the
END POINT should be larger than the START POINT.
5. Select SAVE to save this Area Title.
6. Select EXIT to escape this menu.
3.6-2 Delete Area Titles
1. Move cursor to AREA: and select area number to delete.
2. Press HOME button then the selected Area will be deleted.
3.6-3 Display Area Titles
When turning the AREA TITLE: of the OSD DISPLAY MENU to ON and
escape this menu, AREAx will be displayed at the screen.