8
6
INSTALLING THE MODULE WITHOUT AMPLIFIER
(ART.20004502)
The operating voltage is 12-32 V DC.
Housing 4 units wide
Dimensions (width x height x depth): 70 x 90 x 63 mm
To make connection of the speakers and the power supply easier, the screw
terminals are removed from the unit.
The power supply cables are now connected to the screw terminals. Attention
must be paid to the correct polarity: (Left: Plus (+), Right: Minus (-)).
In order to connect the speakers and hi-fi system correctly, attention must
also be paid here to the correct polarity: ( - Left + | - Right + )
COMELIT AUDIO PLAYER Line properties
Power supply via 12-32 V DC screw terminal
USB port
RJ45 socket for Ethernet LAN
Audio line-out, 2 V
rms
at 10 k
Ω
- L + | - R +
The COMELIT AUDIO PLAYER has two DUO-LEDs, each of which has one green and one red LED.
(“Power/Boot” and “Status”)
Explanation:
The green “Power/Boot” LED lights up as soon as the COMELIT AUDIO PLAYER is supplied with
power.
Two or three seconds after the power is connected, this LED changes to red and starts flashing. Once
the boot-up process is complete, this LED changes back to green.
After the COMELIT AUDIO PLAYER has booted up, the status LED flashes continuously with two
quick pulses followed by a short pause.
This flashing also indicates the load level on the COMELIT AUDIO PLAYER: the higher the frequency
of the flashing LED, the greater the load on the COMELIT AUDIO PLAYER.
The COMELIT AUDIO PLAYER now requires 3 minutes and 30 seconds to boot up.
Summary of Contents for 20004500
Page 1: ...1 COMELIT AUDIO PLAYER ART 20004500 20004501 20004502 ...
Page 2: ...2 ...
