Comelit 20004500 User Manual Download Page 4

 

 

 

INTRODUCTION 

Congratulations on your purchase of the new Comelit Audio Player and thank you for your confidence 
in our product. We are certain that you will enjoy every minute with your COMELIT AUDIO PLAYER. 
To get the best from your new device from the very start, we recommend that you read the operating 
instructions carefully. 
 
In this way, you will familiarise yourself quickly and thoroughly with the COMELIT AUDIO PLAYER. In 
addition, the operating instructions offer you useful tips on installing and using your new device. 
 
 
 

 

Product name: 

Comelit Server and player without amplifier (20004500), Comelit Audio Player 
with amplifier (20004501) and Comelit Audio Player without amplifier 
(20004502) 

Function: 

 

Audio streaming client/ server based on the Squeezebox System 
(SQB system)   

 

 
 
 
 

1.1 

OVERVIEW OF FUNCTIONS 

The COMELIT AUDIO PLAYER enables you to set up a multi-room audio system.  
One COMELIT AUDIO PLAYER is used for each music zone. 
The COMELIT AUDIO PLAYER is either connected to an existing hi-fi system or the connected 
speakers are fed via an integrated amplifier. 
 

1.2 

FUNCTIONAL PRINCIPLE 

The COMELIT AUDIO PLAYER is based on the SQB system. This has a central server (Logitech 
Media Server or Squeezebox Server) to which several streaming clients are connected. 
 
The COMELIT AUDIO PLAYER not only has an integral SQB client, but also an integral SQB server. 
This means it can be operated in both “PLAYER MODE” and “SERVER-PLAYER MODE”. 
 

a)  PLAYER mode:  

In the PLAYER mode, the COMELIT AUDIO PLAYER acts as a streaming client and plays 
back music from a SERVER (ART.20004500). The PLAYER receives the audio files in digital 
form via the network in data packets from the SERVER and then converts these into an 
analogue music format so that they can be played back by the speakers. 
 
 

b)  SERVER MODE: 

In this mode the SERVER acts simultaneously as a SERVER and as a PLAYER (only 
20004501 and 20004502). In other words, the internal client accesses the internal server so 
that the device can also be used in “stand-alone” mode. In this mode, however, there are 
restrictions. It is only possible to connect storage media with a total capacity of up to 32 GB, 
i.e. one USB stick with 32 GB or two USB sticks of 16 GB each can be connected. 
 
ART.20004501 and 20004502 can be used like a PLAYER and SERVER simultaneously 
only if you have 1 audio zone. If you have 2 or more audio zone you have to use the 
art.20004500 like a server. 

 

 

 

Summary of Contents for 20004500


















Reviews: