Comelit 20003320W, Operating Manual

Page: 23 / 43

23
CLIMA
TE
CONTENTS CONTENTS
______________________________________________________________
MANUAL MODE
17,5°
5° 30°
A M
20°
Thermostat 2 Thermostat 3 Thermostat 1
1. 2. 3.
In this mode the current settings remain active until the next
time they are changed manually by the user.
17,5°
5° 30°
A M
20°
Thermostat 2 Thermostat 3 Thermostat 1
1. 2. 3.
1.
Press to enable manual mode
2.
Setpoint precision regulation
3.
Setpoint quick regulation
______________________________________________________________
AUTOMATIC MODE
Thermostat 2 Thermostat 3 Thermostat 1
17,5°
5° 30°
A M
20°
1.
2. 3. 4. 7. 8. 6. 5.
In this mode the device automatically executes the set
schedules.
17,5°
5° 30°
A M
20°
Thermostat 2 Thermostat 3 Thermostat 1
In automatic mode the commands for manual setpoint
adjustment are disabled.
Scheduling
Thermostat 2 Thermostat 3 Thermostat 1
17,5°
5° 30°
A M
20°
1.
2. 3. 4. 7. 8. 6. 5.
„ Press the Settings menu
Termostato 2 Termostato 3 Termostato 1
17,5°
5° 30°
A M
20°
„
Press the icon to access the Scheduling menu.
2.
1.
3.
4.
6. 7.
From To °T
24:00 18°
5.
00:00
Mon Tue Wed Thu Fri Sat
Sun
1.
Days of the week bar
» Select the day of the week to view saved scheduling
2.
Enter programming mode
3.
Copy schedule
Further information in paragraph “Copy programming" on page
19 .
4.
View graph
„ Press the icon to access the graph display mode for climate
programming.
5.
Schedule start time
6.
Schedule end time
7.
Temperature/humidity setpoint
New scheduling
„ Enter programming mode
2.
1.
3.
4.
6. 7.
From To °T
24:00 18°
5.
00:00
Mon Tue Wed Thu
Fri Sat Sun
Mon Tue Wed Thu Fri Sat
Sun
19°
From To °T
07:00 18° 00:00
15:00
21°
07:00
24:00
19° 15:00
„ Select the day of the week for which you want to program
scheduling
» The day being programmed is highlighted in red.
„ Set the schedule end time using - and +
» The cell being programmed is highlighted in blue.
Daily programming should cover a full 24-hour period.
Any hours not programmed by the user will be set by
the system automatically.
„ Set the desired setpoint using - and +
» The cell being programmed is highlighted in blue.
„
Confirm
„ Or exit to cancel