manualshive.com logo in svg

COMedia IPC98, User Manual, Page: 7 / 13

Share
Download
COMedia IPC98 User Manual Download Page 7

IPC98 

Network Camera Module 

w/ remote snap shot

   

 

7

 

Step 2

、

type in user’s name and password ,default name is icam, password is 1234

 

Step 3.

、

click “Submit”, if user name and password is correct, it will enter live preview page as shown 

below.  
 

3.3.1 Image Setup   

   
One can change the resolution and working 
environment on the left hand side. 
After select, click Submit to take effect. 
 
Resolution: video output resolution, can select 
320x240 or 640x480, default is320x240. 
Frequency: power line frequency. Can set 60Hz, 
50Hz, outdoor, change to outdoor when use in the 
outdoor 
 
One can select display or not the date time and 
frame rate of video. Click the dial on-off to enable 
or disable the OSD. 

 

If found the date time is incorrect, need to go advanced setting pages, check the correct NTP server for 
the update. 
Note the video frame rate (fps) may be changing all the time, due to the network traffic status.       
 
Now, the network camera is working for local preview or remote snap shot. Refer to the following 
chapter for detail operation. 

Summary of Contents for IPC98














Reviews:

No comments