EN-10
www.comedes.com
the fan with 10 seconds delay.
Humidity setting:
The device is equipped with a modern hygrostat (humidity regulator) and switches off
automatically after reaching the desired humidity in order to save energy. The compressor
switches off first and the fan 30 seconds later. If the humidity in the room rises again, the
Comedes LTR 100 NEO automatically switches on again.
By repeatedly pressing the key, the target air humidity can be set as follows:
To operate the device in continuous operation (CNT), press the button repeatedly until
"-" is shown on the display. After approx. 5 seconds, the continuous operation indicator next to
the display will light up.
During operation, the current humidity is shown on the display.
To display the current room temperature on the display, press and hold this button for at least
3 seconds.
The dehumidifier starts dehumidifying when the room humidity is at least 3% higher than the
set target humidity.
Timer:
Press the timer button to start the timer function. Press repeatedly to set a time of 1-24 hours.
If the timer is activated, this is indicated by the corresponding LED.
If you activate the timer during operation, the device switches off after the set time.
If you activate the timer while the device is in standby mode, the device starts automatically
after the set time has elapsed.
To turn off the timer, press the button repeatedly until "00" is displayed.
If the timer is active, the "Timer" LED lights up blue.
Speed:
Press this button to switch between the two fan levels.
The currently selected fan speed is indicated by the "SPEED" LED.
This LED lights up blue for the small fan stage and orange for the high fan stage.
