Wiring
3
Important notes:
♦
Power supply must be turned off
during mounting and wiring!
♦
With cases 'B', 'H', and 'V', use terminal A10
for range 0...10 V, and A11 – for other
.
♦
In case of a TI08-L with 90...250 V
power supply, use terminal 8 for grounding,
and 5 – for input wiring, and adjust
the jumper as shown on the device label.
♦
Connecting a potentiometer requires
excitation voltage of 5 V, 10 mA
(see
'
Specifications
'
).
Input signal wiring
Connect the input
with regard to its type
through the respective and
depending on the case type
(see '
Specifications
')
terminals on the device back.
Voltage transmitters
should be powered
ONLY
by external source!
Output wiring
Connect the outputs
with regard to their types
(see '
Specifications
')
via the respective terminals.
Power supply wiring
Connect the right power
supply voltage for your device
(see '
Specifications
')
through the respective
terminals.
More detailed
wiring schematics
are available at
comecogroup.com
under 'Support' tab.
