Parameter Programming
5
Some parameters
are accessible only
when the respective
functionality is installed.
(see
'
Specifications
'
).
- Changing
Point Position
value
reflects on the real value
of all parameters
with ISU.
E.g.: changing
Point Position
value
from (0) to (0.0)
would change
a set-point value
of 100 to 10.0.
Device parameters
RT28U is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
The parameters and their values are listed
in the order they appear on the display
when the encoder knob is being turned UP.
Setting numerical parameter value
♦
Enter parameter value adjustment mode
(see '
Program Levels
').
♦
The whole part of the value together with
the left zeroes appears on the display,
and all digits blink.
♦
To increase or decrease the value,
turn the encoder knob respectively
UP or DOWN.
♦
For fine adjustment, turn the encoder slowly
as to sense its positions. For coarse
adjustment, turn the encoder curtly.
♦
Confirm the adjusted value by pressing
the encoder knob.
♦
If the new value has not been confirmed
and the encoder has not been used
for a certain period of time,
value adjustment automatically ceases,
and the parameter retains its initial value.
Setting symbolic parameter value
♦
Enter parameter value adjustment mode
(see '
Program Levels
').
♦
Read the blinking parameter value.
♦
To change the current value,
turn the encoder UP or DOWN.
♦
Confirm the adjusted value by pressing
the encoder knob.
♦
If the new value has not been confirmed
and the encoder has not been used
for a certain period of time,
value adjustment automatically ceases,
and the parameter retains its initial value.
