manualshive.com logo in svg

Comdial DSU II SCS84125J, Station User'S Manual, Page: 2 / 128

Share
Download
Comdial DSU II SCS84125J Station User'S Manual Download Page 2

This user’s guide is for the following system:

DSU II Digital Expandable Systems

This user’s guide applies to the following telephone models:

•Impact 8012S-** Rev. A and later.
•Impact 8024S-** Rev. A and later.
•Impact SCS 8324S-** Rev. A and later
•Impact SCS 8312S-** Rev. A and later
•Impact SCS 8324F-** Rev. A and later

Contact your Comdial dealer for updates of this as well as other 

Comdial publications.

Copyright © 2003 Comdial Corporation

All rights reserved.  Unauthorized use of this document is prohibited.

Comdial Corporation

106 Cattlemen Road, Sarasota, FL 34232

(941)554-5000 or (800)266-3425

-Notice-

Comdial reserves the right to make any changes and improvements in the 

product described in this document at any time and without prior notice.

Impact is a trademark of Comdial Corporation.  All other product names 

are trademarks of their respective owners.

Summary of Contents for DSU II SCS84125J

































































































































Reviews:

No comments