Comdial 8900-IP Series, User Manual

Page: 93 / 162

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 83
6.6 Response Message Button
You may program a RESPONSE MESSAGE button, which allows
you to send an LCD message to a caller who has initiated a SOHVA
or intercom call from another LCD speakerphone, or to send an LCD
message to another LCD speakerphone that you call and receive a
busy signal or no answer.
• To store a fixed RESPONSE MESSAGE button (delivers the
same message each time it is pressed),
1. Select OPTIONS .
2. Select Programming .
3. Select NEXT until the Feature Button option appears.
4. Select Feature Button .
5. Select the programmable button you wish to use as a
response message button.
6. Select NEXT until the Response Message option appears.
7. Select Response Message .
8. Select from the list of displayed messages. Select NEXT to
scroll through the list of messages. If you use the Back at or
Call options add to them as follows:
• For Back at message, dial the code for the time numbers
and colon from dialing codes table.
For example, dial #0001290405 for time 01:45.
• For the Call message, dial the code for telephone number
where you can be reached.
For example, dial #090708150202
0000 for number 978-2200).
9. Repeat steps 5 through 8 for other features, or select EXIT
to end programming.