Comco Inc.
iv
Issue Date: January 2009
Welcome!
Welcome to the User’s Manual for the Comco DirectFlo™ model DF1400
Micro-abrasive Blaster! You have purchased the finest micro-abrasive blaster
available today, and this manual is designed to help you set up, operate, and
maintain the
DirectFlo™ DF1400.
NOTE:
Prior to setting up and operating your DirectFlo, the operator
and the department supervisor should carefully review this
entire manual.
The Comco Warranty
Comco warrants that the
DirectFlo™ DF1400 will be free from all defects in material and
workmanship under normal use for a period of one year from the date of purchase or
2,000 hours of normal operation, whichever comes first.
The warranty period begins when the equipment ships from the Comco facility and
applies to the original owner only. Comco is not liable for damages from any cause or
use of such equipment beyond the cost of repairing any defective parts.
If the equipment fails to perform satisfactorily during the warranty period, Comco has the
option to do any one of the following: 1) Send replacement parts to the customer to be
installed by the customer; 2) Repair the unit at the customer’s facility; or 3) Request that
the unit be returned to the Comco factory. Comco shall furnish any replacement parts
without cost, F.O.B. the Comco factory in Burbank, California, provided that Comco is
notified of the defect within the warranty period. Any defective parts shall be returned to
Comco for inspection and analysis.
Exclusions
The above warranty does not apply to defects or problems resulting from improper or
inadequate maintenance by the customer; unauthorized modification or misuse; failure
to follow the operating instructions; the use of any supplies or parts, including but not
limited to nozzles, powders, and attachments, not manufactured or supplied by Comco.
The warranty also does not cover problems resulting from improper or inadequate
facilities (contaminated air, improper power) or items that should be expected to wear in
normal operation, such as nozzles, abrasives, tubing, or fittings.
This is Comco’s only warranty and is in lieu of all other warranties of
merchantability and fitness for any particular purpose. No representations or
warranties are authorized except as herein stated.
