background image

 

13 

Regulatory Approvals 

 

FCC Statement 

This equipment generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

To assure continued compliance, any changes or modifications not expressly approved by the 
party responsible for compliance could void the user’s authority to operate this equipment. 
(Example - use only shielded interface cables when connecting to computer or peripheral 
devices). 

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.  

This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC 
Rules. 

FCC Radiation Exposure Statement 

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with a minimum distance of 20 
centimeters between the radiator and your body. 

Note: The country code selection is for non-US model only and is not available to all US 
model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation 
channels only. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:  

(1) This device may not cause harmful interference, and  

(2) This device must accept any interference received, including interference that may cause 
undesired operation. 

This transmitter must not be co-located or operating in conjunction with any other antenna or 
transmitter. 

This product is UL and cUL certified and comply with UL60950-1 Information Technology 
Equipment applicable requirement.  

Summary of Contents for XCAM2



















Reviews: