Comcast High-Speed 2go User Manual Download Page 9

Page: 9 / 67

LED Operation

Your device has two lights called LEDs:

•

The Service Status LED is located on the side of your 3G Mobile Hotspot near the USB port.

•

The Power Button LED is built into the power button of your 3G Mobile Hotspot.

The 3G Mobile Hotspot LEDs provide valuable information about the state of the device and
connection.

Service Status LED

Indicates

No light

—

No power; the device is powered off.

Green

Solid

The 3G Mobile Hotspot is powered on and

connected to a mobile broadband network, but the

device is not transmitting or receiving data.

Slow Blinking

The 3G Mobile Hotspot is powered on, but there is

no available service.

Intermittent Blinking The 3G Mobile Hotspot is transmitting / receiving

mobile broadband data. The blinking rate is

proportional to the data speed.

Power Button LED

Indicates

No Light

—

No power; the device is powered off

Green

Solid

Glowing

The 3G Mobile Hotspot is powered on and fully

charged.
The 3G Mobile Hotspot is in hibernate mode (power

saving) and fully charged. Press the power button to

wake up the device.

Blue

Solid

The 3G Mobile Hotspot is powered on and roaming.

Red

Blinking

The battery is critically low.

Amber

Solid
Blinking

The battery is charging.
Error. See

Common Problems and Solutions

on page

46.

Summary of Contents for High-Speed 2go




































































Search results

Summary of Contents for High-Speed 2go

Reviews:

Related manuals for High-Speed 2go

Brands by name

Popular brands

Comcast High-Speed 2go, User Manual

Search results

Summary of Contents for High-Speed 2go

Reviews:

Related manuals for High-Speed 2go

Brands by name

Popular brands