manualshive.com logo in svg

Comcam ComCam-10 series, User Manual, Page: 20 / 36

Share
Download
Comcam ComCam-10 series User Manual Download Page 20

17

Hardware Compatibility Guidelines

The following PCMCIA devices have been tested with COMCAM-10:

PCMCIA 802.11b Wireless Ethernet
————————————————
Lucent Orinoco Silver or Gold card
Agere Silver or Gold card
Avaya Silver or Gold card (Gold not tested but should work)
Buffalotech Silver or Gold Card (Gold not tested but should work)
(NOTE1 - all of these cards are reskinned Orinoco)
(NOTE2 - card firmware 7.x or higher required for peer-to-peer)

PCMCIA Compact Flash
——————————
Sandisk Compact Flash w/ PCMCIA holder
Memorex Compact Flash w/ PCMCIA holder
Simple Technologies CF w/ PCMCIA holder

PCMCIA ATA Flash
————————
Simple Technologies (for burn-in labtest only)

PCMCIA Hard Disk
————————
Kanguru external 3.5" PCMCIA-to-IDE hard disk
Kanguru external 2.5" PCMCIA-to-IDE hard disk (current model)
[NOTE - with Kanguru disk set cable switch to PCMCIA (toward cable)]
CiTiRom PCMCIA to IDE adapter with enclosure
Shining PCMCIA to IDE adapter with enclosure
IBM MicroDrive PCMCIA harddisk
IBM TravelStar-E external PCMCIA drive (no longer produced but nice drive)
“Mr. X” drive

PCMCIA Modem
——————
Zonet ZFM5600 PCMCIA modem (IDNC rom 2.5 or higher)
U.S. Robotics Megahertz 56K XJ/CC1560J PCMCIA modem
Motorola MobileSurfer 56K PCMCIA modem

PCMCIA Serial Card
—————————
Eiger Labs / Fujitsu Serial card

PCMCIA GSM Modem
————————
Nokia GSM 900/1800 Card Phone card (autoanswer may not work)

PCMCIA PHS Card
———————
DoCoMo card

Summary of Contents for ComCam-10 series





































Reviews:

No comments