Comcam ComCam-10 series, User Manual, Page: 11 / 36

8
Details of COMCAM-10 Settings
Basic Ethernet Settings
These are the network settings used for the default network interface. Normally this is the wired
ethernet. However, if PCMCIA_DEVICES is set to 0x04 (ORINOCO) and there is an Orinoco 802.11b
pcmcia card installed, and ORINOCO_HAS_OWN_NET is 0, these settings will be used for the Orinoco
card instead and the wired ethernet will be disabled. If you wish to use the wired and wireless
interfaces at the same time, see ORINOCO_HAS_OWN_NET and its related settings near the end of
this settings list.
Some LAN networks provide IP settings automatically. To use this feature on a LAN, set DHCP to 1.
The C3 viewer program, if used on the LAN, will find your ComCam unit and list it in New Cameras.
DHCP 0=use IP, SUBNET, GATEWAY, and DNS settings below
1 = network DCHP server provides dynamic IP settings
For non-DHCP networks, the following four fixed settings must be provided.
Note - To function on the same network, IP addresses must be unique unused numbers which have the
same network portion (typically the first 3 numbers) as all other devices on the same physical network.
Please consult your system administrator for assistance.
IP IP address for ComCam (example 192.168.1.120)
SUBNET_MASK Subnet for ComCam (example 255.255.255.0)
DEFAULT_GATEWAY Gateway IP to internet, if any, or 0.0.0.0 for none
DNS_SERVER DNS server IP, required for TimeServer use, or 0.0.0.0 for none
The following port number setting applies to all network interfaces.
OVERRIDE_PORTNUM Any non-zero value overrides default ComCam communication
port 2108. With a port-mapping router, this can be used to
place multiple internet reachable ComCam units
on an internal LAN.
ID Settings
DESCRIPTIVE_NAME Your choice of name (example Warehouse Cam #1)
LOCATION_NAME Your choice of place (example, Loading Dock or Chicago)
HOSTNAME Not currently used
ADMIN_PASSWORD Password for remote settings changes and telnet (no spaces)
LATITUDE Your latitude in format like 10.10.10.N
LONGITUDE Your longitude in format like 10.10.10.E