3
www.combisteel.com
PLEASE READ THE OPERATION MANUAL BEFORE USING. SAVE THIS MANUAL FOR LATER USE.
Safety tips
•
Position on a flat, stable surface.
•
A service agent/qualified technician should carry out installation and any repairs if required. Do not remove
any components or service panels on this product.
•
Consult Local and National Standards to comply with the following:
-
Health and Safety at Work Legislation
-
EN Codes of Practice
-
Fire Precautions
-
IEE Wiring Regulations
-
Building Regulations
•
DO NOT use jet/pressure washers to clean the appliance.
•
DO NOT use the appliance outside.
•
DO NOT use this appliance to store medical supplies.
•
DO NOT use electrical appliances inside the appliance (e.g. heaters, ice cream makers etc.)
•
DO NOT stand or support yourself on the base, drawers or doors.
•
DO NOT allow oil or fat to come into contact with the plastic components or door seal. Clean immediately if
contact occurs.
•
Always carry, store and handle the appliance in a vertical position and move by holding the base of the
appliance.
•
Always switch off and disconnect the power supply to the unit before cleaning.
•
Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local
authorities.
•
If the power cord is damaged, it must be replaced by a agent or a recommended qualified technician in order
to avoid a hazard.
Caution, risk of fire
•
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
•
Warning: Keep clear of obstruction all ventilation openings in the appliance enclosure or in the structure for
building-in.
•
Warning: Do not use electrical appliances inside the food storage compartments of the appliance, unless
they are the type recommended by the manufacturer.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this
machine will provide the best possible performance from your product.
1. Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces.
2. Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for ventilation.
