background image

51

Section 18 - Care and Cleaning

52

Section 19 - Additional Information

CLEANING COVER

  -  To remove cover first detach shoulder straps by disconnecting the metal  

    harness plate at the rear of the seat.

 

  -  Then withdraw the shoulder straps and pull them through the cover.

    Lift the cover off.
  -  Wash according to the instructions on the back of the cover.

    CAUTION: When replacing the cover always check that the shoulder  

    straps are correctly secured to the metal harness plate. See page 16. 

CLEANING HARNESS

  -  Surface wash with mild soap and damp cloth.

CLEANING SHELL

  -  Wipe with a mild solution of soap and water. Avoid wetting labels. 

CLEANING BUCKLE

  -  Rinse buckle with warm water. DO NOT use household detergents.  

    Never lubricate buckle.

CERTIFICATION

  -  This child restraint comforms to all applicable Federal Motor Vehicle  

    Safety Standards for use in motor vehicles and aircraft.

WARM WEATHER

 

  -  Car seat parts can get very hot in the sun or warm weather.

    To avoid burns always check before putting the child in the car seat.

VEHICLE SEAT PROTECTION

  -  Protect vehicle seat. Use a thin car seat mat, thin towel or thin blanket  

    under and the behind car seat.

CAR SEAT USEFUL LIFE

  -  DO NOT use after 7 years from date of manufacture on label.

INSTRUCTION MANUAL STORAGE

  -  Store Instructions in the pocket at the back of the car seat.

Summary of Contents for Shuttle 8087 Series





























Reviews: