Combi Nemurie UF750, Instruction Manual

Page: 18 / 42

2
Using the canopy
Using in small size (Figure 2.1): After having extended canopy to full coverage, push up
the frame of the canopy back.
Using in big size (Figure 2.2) : Grab the front and back canopy frame and release the
canopy to biggest coverage.Press on the left and right canopy levers.
When using canopy as sunshade (Figure 2.3)
：
Hold at the canopy hinge when the canopy is at its largest position and rotate it to the
right position.
It clicks into place automatically.Stop rotating when it reaches the right position.
Look at the canopy from the front side ensuring the left and right side are at the same position.
Folding up the canopy
(
Figure 2.4
)：
Lift the canopy levers and fold the canopy backward.
Using the top window (Figure 2.5
）
Undo the snap and roll up the window cover.
Secure the snap on top.
Using the air through window (Figure 2.6)
When using the front ventilation window, release the two snaps and unfold the ventilation
window cover backwards.
When using the back ventilation window, release the two snaps and unfold the ventilation
window cover to the front.
Using the Air Through System (Air through louver)
Open the air through system: press down the adjustment lever to open the air through
louver. (Figure 3.1)
When the air through system is not in use, please push up the lever to close the air
through louver. (Figure 3.2)
Secure the snaps of air guide to the ones on the basket. (Figure 3.3)
Safety Harness (Figure 3.4)
a. The shoulder buckle is under the waist buckle (left and right) and secure together into
crotch buckle.
b. Press the crotch buckle button to release the harness.
NOTE: When changing the seat recline angle, always check the harness to ensure
it is still optimally adjusted.
WARNING
: Always use the restraint system.
Adjusting the shoulder belt and waist belt (Figure 3.5)
Tightening: Pull the belt end as shown direction.
Extending: Loose and pull out the belt in the front as shown direction , then pull it inward
to extend the length as shown direction .
1
2
1
2
3
4
5
6
1
2
Unfolding/Opening (Figure 1.1)
The handle grip is returned to the straight position while pressing both adjustable button.
Slide the safety lock as demonstrated direction and hold it in place.
Grip and pull the folding lever upwards simultaneously
.
Slightly lift the stroller and open it.
Adjusting the handle position (Figure 1.2)
Adjust the angle of handle grip by pressing both adjustable buttons.
Release the buttons when handle reaches the right position.
Using the swivel wheels (Figure 1.3)
To use the swivel wheels - Lift the swivel wheel locks (left and right) to release.
(same direction as the moving direction).
Swivel wheels not in use - Press down the swivel wheel locks (the ones at the
same direction of the user) to lock.
WARNING
: When you switched the normal use or handle, please make sure
to raise the swivel wheel locks to release the locks. If you do not release the locks,
there is a possibility that the wheels are not automatically switched.
When reversing the handle, please release swivel locks (total 4 places)
When the wheels are locked in the wrong direction, the stroller may damage to the
parts while open.
Using the stoppers (Figure 1.4)
To lock wheels, press the stoppers down which are located at wheels on both left and
right sides.
Try to push the stroller back and forth slightly to ensure that the stoppers are properly
engaged.
WARNING:
Always engage the stoppers when you leave the stroller.
Adjusting the crotch belt (Figure 3.6)
Tightening - Pull the center belt end as shown direction.
Extending - Pull out the length needed to adjust to direction . Pull toward direction
to extend the crotch belt.
NOTE: Always use the crotch belt together with the waist belt and shoulder belt and
make sure they are properly adjusted.
Adjusting the backrest (Figure 4.1)
Recline - Pull down the seat reclining buckle.
Upright - Pull down the reclining cord by both hands at the same time.
The headrest will be lifted automatically after the backrest is reclined. (movable headguard)
NOTE
：
Find it difficult to operate the reclining function. (Figure 4.2)
The reclining cord may be twisted, please follow below steps to straighten it.
Lower the backrest to the lowest position.
Release the twist at the recline cord end along the recline mechanism.
Reversing handle (Figure 4.3)
Lift and release the handle locks to change the handle direction until the locks are
secured in places.
Detaching the sun canopy (Figure 4.4)
Pull out the canopy joint end gradually, pull up the canopy away from the holder.
Attaching the sun canopy (Figure 4.5)
Switch the handle to face rear.
Recline the backrest to the lowest angle.
Place the canopy facing the proper direction.
Plug the canopy joint into the canopy holder.
Release the stoppers (Figure 1.5)
Lift the stoppers to unlock.
Open the front guard (Figure 1.6)
Press and hold the button at the end of the front guard as illustrated.
Detach the front guard.
Attach the front guard (Figure 1.7)
To attach front guard, lift and plug into the projected part at the end of the armrest.
15