Combi I-Thruller, Instruction Manual

Page: 21 / 59

Reclining the Seat Unit ( Figure 4.2 )
The seat unit can be adjused in three different positions.
①
To adjust the entire seat unit, press seat position ajustment button located at the front
end of seat unit.
②
To recline backrest, use the reclining buckle to adjust seat unit into desired position.
Adjusting the canopy ( Figure 4.3 )
Pull canopy forward or backward to adjust the canopy size.
Folding the stroller ( Figure 5.1 )
Please fold the canopy backward before folding.
①
Slide to release the safety lock of direction as illustrated.
②
Grip the folding lever and slightly lift up the handle, then press down the handle as
illustrated to fold the stroller.
Using the Safety Harness ( Figure 5.2 )
①
The shoulder buckle is under the waist buckle ( left and right ) and secure together into
crotch buckle.
②
Press the crotch buckle button to release the harness.
The stroller is equipped with a removable front guard.
①
To remove, press the buttons located on both sides together to release.
②
To open for the child to get in and out, press one button only.
To assemble, line up the tab on front guard with groove on both sides of the stroller.
Note: To keep a closer look at the infant while operating as infant bed,
install seat unit in rear facing position.
WARNING:
Do not reverse the seat unit with infant in it.
Note: Do not fold the stroller when seat unit is in rearward - facing position.
WARNING:
When opening and closing the stroller, please ensure
your in contact with any mounting parts. Remove all
items from the basket before folding the stroller.
Assembly and Removal of Removable Front Guard ( Figure 4.4 )
WARNING:
Do not get hold of the front guard to lift the stroller.
前护栏单边拆卸时，请不要拉、拽扶手，以防车体翻倒
而导致婴幼儿跌落。婴幼儿乘坐时，请务必确认扶手处
于锁定状态。
WARNING:
前護欄单边拆卸时，请向下旋转扶手，否则有可能导致
误伤婴幼儿头部或眼睛
。