Combi CROSSGO 4CAS, Instruction Manual

Page: 14 / 29

※
Handle grid is folded in sales package.
Slide the safety lock as demonstrated direction and
hold it in place.
While holding the folding lever, lift the handle. Lift the
stroller slightly and press the handle backward until it
clicks. Then the stroller stretches out completely.
13
Unfolding the stroller
打開手推車
1
2
1
2
1
2
一邊按下左右推把高度調節按鈕，一邊轉動
推把迴到直桿狀態。
※包裝時，把手呈折疊狀態。
將把手上的安全鎖向箭頭方向滑動並握
住。
同時握著並提起開關掣，稍稍提起手推車
並用力向後下壓把手，
聽到“咔嚓”一聲表明已完全打開。
1
1
1
2
2
2
To use the swivel wheels – Lift the swivel
wheel locks (left and right) to release
(according to the moving direction).
Swivel wheels not in use – Press down
the swivel wheel locks (the ones at the
same direction of the user) to lock.
WARNING:
When you switched
the normal use of handle, please make
sure to raise the swivel wheel locks to
release the locks. If you do not release the
locks, there is a possibility that the
wheels are not automatically switched.
When reversing the handle, please
release swivel locks (total 4 places).
When the wheels are locked in the wrong
direction, the stroller may damage to the
parts while open.
The handle grip is returned to the straight position while pressing both adjustable button.
使用轉向功能時，向上推起轉向輪鎖（左右）以解除。
不使用轉向功能時，請按下和推行者同壹方向的2處轉向輪鎖以鎖定。
警告：
當您已切換至正常使用或正常把手，請務必將腳輪鎖提起解除腳輪。若不解除鎖定，這可
能使腳輪不能自動轉換。
轉換把手時，必須解除轉向輪鎖（共4處）。車輪被錯誤的方向鎖住時，打開手推車可能損壞零件。
Using the swivel wheels
使用轉向輪