将腰带前端从穿孔 穿出再通过孔 拉出。
将腰带前端通过穿孔 拉出。
将腰带前端再向穿孔 通过
最后将腰带向穿孔 拉出，并调至到合适的长度。（保留3cm以上）
17
Attaching the insert plastics
将肩带、腰带装到插扣片上
以上
Use the waist belt end
to pass through from
the buckle back slot
and slide out to slot
.
Pull out the waist belt
end from slot
.
Slide out the waist belt end through slot
.
Pull out the waist belt from slot
and adjust the applicable length.
(Leave 3cm or above)
1
2
1
2
3
3
4
4
C
C
B
A
A
C
C
B
A
A
Adjusting the crotch belt
调节中央带时
1
2
3
4
Shoulder
肩
Waist
腰
Adjusting the waist/shoulder belt length
调节肩带、腰带的长度
Pull the waist belt end to direction A to shorten.
Loose and pull out the waist belt to direction B, then pull it
inward to extend the length to direction C.
Use the same method on waist belt to adjust the shoulder belt.
NOTE: Always leave at least 3cm at the belt end.
1
2
1
2
1
2
B
C
A
收紧时，将中央带朝着 方向拉。
延长时， 按照 方向拉出中央带后顺着 方向拉到底。
C
Tightening - Pull the crotch belt to the direction .
Extending - Follow the direction and pull out the belt,
then follow the direction and pull the belt to the end.
A
B
A
B
C
收紧时，将腰带的前端位置往图标箭头A方向拉。
延长时，将腰带表侧往B箭头方向松脱出来，然后再将腰带向里
侧往C 箭头方向拉。
肩带的调节方法同腰带的调节方法一致。
小提示：注意腰带末端应留下3cm以上的长度。
