Combi ANGEL WAGON AW Series Instruction Manual and Inspection Manual
Front casters ø100
with stopper
Rear caster ø100
with stopper
2
Replacement Procedure for Casters with Stoppers (ø100)
The tools on the right are
required for this procedure.
l
Dedicated wrench
(21 and 23 mm)
×
1
l
Wrench (19 mm)
×
1
Front Casters
Rear Casters
1. While holding the hex cap nut in place with the wrench (19 mm),
rotate the bolt counterclockwise using the dedicated wrench (23
mm).
2. Remove the caster and the washer.
1. Rotate the bolt counterclockwise using the dedicated
wrench (23 mm).
2. Remove the caster and the spring washer.
Install the caster following the removal procedure
in the reverse order and tighten it securely using
the wrench.
Install the caster following the removal procedure
in the reverse order and tighten it securely using
the wrench.
l
Removal
l
Removal
l
Installation
l
Installation
Hex cap nut
Hex cap nut
Plain washer
×
1
Plain washer
×
1
Spring
washer
×
1
Spring
washer
×
1
Hex bolt
Hex bolt
Front caster
Front caster
Wrench (19 mm)
Rear caster
Rear caster
Dedicated wrench
(23 mm)
Dedicated wrench
(23 mm)
*The illustration shows AW3(forward facing type). The changing procedure of AW4 series is the same.
19
Summary of Contents for ANGEL WAGON AW Series
Page 31: ...30...