EQUIPMENT MANUAL FOR RD-9120
RD-9120 QE
Copyright - refer to title page
Page 26
ENU Status : 1-0-0
3.4.3 POLE MOUNTING DETAILS
1. The equipment can be mounted on customer-located poles of about 75mm in diameter.
2. Insert and tighten the U bolts to secure the mounting rack onto the pole.
3. The remainder of the installation are identical to wall-mounting.
Nut M10
Plain Washer M10
Mounting Rack
Pole
U bolt M10x85x110
Recessed
Hex socket bolt M8x80
Hex socket bolt M8x25
Allen key
Alignment Fixture
Door lock
Figure 7: Pole mounting overview
3.4.4 DRIP-LOOP
Comba recommends that every horizontal cable entry to the equipment forms a 'U' before its entry to the
equipment. Any accumulated water on the cable will drip down at the bottom of the loop and will not climb
up to the equipment.
