COMARCH beacon
User manual
7
6
6. Introduction
a. Dimensions: equilateral triangle with a 5 cm long side
with cut-off tops, height 1.4 cm
b. Weight: 20g
c. Mounting types
Recomended types of mounting: UVA tape, Micro-Suction
tape pads or screws (accessories are optional).
CAUTION: Be cautious when opening beacon casing.
Electronics is shock sensitive.
ATTENTION: For holes drilling use a drill of
appropriate type and thickness. Recommended screws:
1. Screw A: length 30mm, thread diameter: 3.5mm,
head diameter: 7mm, head type: conical.
2. Screw B: length 30mm, thread diameter: 3.5mm,
head diameter: 7mm, head type: cylindrical.
ATTENTION: Do not overtighten the screws since it may
cause the plastic casing cracking.
7. First time usage
a. If the device is turned off (see description on the package):
I. Open the beacon caseing.
WARNING: Do not open casing using your fingers, since
this could injure your nails.
II. Remove the battery isolator film.
III. Close the beacon casing.
Beacon is active now.
b. If the device is turned on (see description on the package),
beacon is already active.
Mounting using screws
Mounting using Micro-Suction tap
1. Case bottom part
2. Screw type A
3. Battery
4. Electronic
3. Screw type B
4. Case top part
Summary of Contents for CB001
Page 1: ...User manual 3 Warranty 11...
