InteliVision 5 CAN - 1.3.0, Global Guide
23
Note:
All context buttons are user configurable up to customer’s demands, overview above corresponds to
default screen configuration included in default controller’s archives.
4.4 Control buttons
Start:
Start command
Stop:
Stop command
Fault reset:
Acknowledges faults and alarms (active only in Alarm screen)
Horn reset:
Deactivates the horn (audible alarm)
Note:
START and STOP buttons are independent on the InteliVision 5 screen, menu or sub-menu. The buttons
work analogously to START/STOP buttons on a controller. The buttons can be deactivated by InteliVision 5
CAN lock mode, indicated by
icon.
4.5 Metering screens
The Metering screen is mainly intended for values overview. The home (main by default) metering screen
appears after the InteliVision 5 CAN and controller are powered up. The jump to the first metering screen is
performed after 15 minutes of inactivity and only in case there is no active and unconfirmed alarm i n the
controller.
.
Arrows
or
are used for measurement screens browsing.
