InteliLite4 AMF20 Global Guide
87
User access management alarms
The controller comes to the customer with Production mode turned on, the default administrator password
installed and with no prefilled email address for password reset. For security purposes, the following user
access management alarms will appear. Detailed description of situation when the alarms are active is
provided below:
Wrn Production Mode
is present in the alarm list any time the production mode is turned on. To turn off
the Production mode go to User management and uncheck the checkbox Production mode or go to
Production Mode display screen and select disable.
Wrn Default Password
appears in alarm list when the default administrator password is set and
communication module is plugged in the controller. The purpose of alarm is to inform that the controller
might be or is connected to an untrusted interface and cybersecurity rules are not fulfilled because there is
default administrator password.
Wrn Password reset e-mail address is not set
appears in alarm list when there is no email address set
and the administrator password is not the default one. The purpose of alarm is to inform that there is
possibility that the controller might not be accessible by administrator password due to a forgotten
password. The password reset procedure cannot be performed without a filled email address. To fill out
email address, the administrator password is required.
5.3.4 Login
Note:
From all measurement pages you can easily go to the setpoint group page by pressing the Page
button.
Note:
Use the Up
and the Down button
to select setpoint
group Login.
Note:
Use the Enter button to enter setpoint group Login.
