ComAp InteliDrive DCU Industrial, Global Manual

Page: 112 / 350

InteliDrive DCU Industrial 3.4.0 Global Guide
112
Setpoint group
Communication
Settings
Related FW 3.4.0
Range [units] [STANDARD, MODBUS]
Default value STANDARD
Force value
Alternative config
Step [-]
Comm object 24522 Related applications AS, SS
Description
Communication protocol selection.
STANDARD: InteliDrive (DriveConfig, InteliMonitor, Remote panel) communication protocol.
MODBUS: Modbus RTU protocol.
Note: Detailed description of Modbus protocol include some examples, see in InteliGen Communication
guide .
RS232 Mode
6
back to List of setpoints
Setpoint group
Communication
Settings
Related FW 3.4.0
Range [units] [19200, 38400, 57600, 115200] [bps]
Default value 38400
Force value
Alternative config
Step [-]
Comm object 24341 Related applications AS, SS
Description
The setpoint adjusts communication speed of the RS232 interface when RS232 Mode (page 112) is set to
STANDARD.
Note: If the controller is connected to IB-NT via the RS232 interface, set the speed to 57600 - the
supported communication speed.
RS232 TermCSpd
6
back to List of setpoints