InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf,
©ComAp – June 2013
284
N
OTE
:
Language index 0 selects the default language of the terminal, i.e. the
language, which is adjusted in the terminal using it's menus.
N
OTE
:
The reaction on changes of these inputs is delayed about 1 sec to ensure the
new combination is valid (e.g. if a rotary selector switch is used).
C
AUTION
!
Each language change causes the reinitialization of the display. Function of
the controller is not influenced.
14.2.1.85
Binary input: Lang sel int C
Related FW
3.0
Description
This is one of three binary inputs
, used for selecting language of the
built-in
IG-NT terminal (display). As the
IS-NT does not have built-in terminal, this input is assigned to the terminal
(display) #1, which is supposed to be directly attached to the controller or
mounted close to it.
N
OTE
:
Using these inputs for language selection is an option only. If the inputs are
not configured, the language can be selected using the menus on the
terminal.
E
NCODING TABLE
L
ANGUAGE INDEX
I
NPUT
A
I
NPUT
B
I
NPUT
C
0
0
0
0
1
1
0
0
2
0
1
0
3
1
1
0
4
0
0
1
5
1
0
1
6
0
1
1
