COMAC Optima 90 Use And Maintenance Manual Download Page 6

•  The machine must only be powered with a voltage equal to that shown on the serial number 

plate.

•  Read the labels on the machine carefully. Do not cover them for any reason, and replace them 

immediately if they become damaged.

•  The machine must only be used and stored in an enclosed or covered environment.

• 

The machine must not be used or stored outdoors in damp conditions or directly exposed to 

rain.

•  Use the machine only in the way described in this manual.

•  Do not pick up anything that is burning or smouldering, like cigarettes, matches or glowing 

embers.

•  Reduce speed on slopes and dangerous corners.

•  Reduce speed before making a turn.

•  Keep all parts of your body inside when the machine is moving.

•  Be careful when reversing.

•  Do not transport passengers. Do not use the machine as a means of transport.

• 

Always follow the instructions for mixing, use and disposal on the containers of the chemical 

substances.

ATTENTION:

•  The appliance should not be used by people (including children) with reduced physical, 

sensory or mental capabilities or who do not have the necessary experience or knowledge 

of the appliance.

•  If the machine is to be used in the presence of other individuals, aside from the operator, the 

beacon light (optional) must be utilized.

•  Always take appropriate measures to protect any individuals and/or objects that may be present 

while using this machine.

• 

Be careful to avoid collisions with shelving or scaffolding, above all if there is a risk of objects 

falling from heights.

•  Do not place any liquid containers on the machine.

•  The machine must only be used under temperature conditions ranging from 0 °C to +40 or 

+32 °F to 104 °F.

• 

When using detergents to clean the flooring, always follow the instructions and respect the 

warnings indicated on the containers' labels.

•  Always use appropriate gloves and protective equipment when handling the detergents used 

to clean the floor.

•  Avoid working with the brushes when the machine is standing still, so as not to damage the 

floor.

• 

In the event of a fire, use a powder fire extinguisher if possible, and avoid the use of water.

• 

Do not allow any objects to penetrate into the machine's openings. Do not use the machine is 

the openings are obstructed.

• 

Keep the machine's openings free of any dust, lint, hairs, or any other foreign materials that 

could reduce the airflow.

• 

Do not remove or alter any labels affixed to the machine.

•  This machine has not been approved for use on public streets or roadways.

• 

This machine has not been made for external use but internal locations only.

•  Only use the brushes and pad holders that have been supplied along with the machine or those 

specified in the Operator's Manual. The use of other brushes or felt pads could compromise the 

machine's safety conditions.

•  Before starting to work check that there are no leaks.

6

Summary of Contents for Optima 90

































Reviews: