SERIAL NUMBER PLATE
The serial number plate is located at the rear of the steering column, and indicates the machine's general characteristics, including its serial number. The serial number is a very important piece of information and
should always be provided together with any request for assistance or when purchasing spare parts. The serial number plate contains the following:
1.
The weight of the batteries used to power the appliance (expressed in Kg).
2. The IP protection rating of the appliance.
3.
The gross weight of the appliance (expressed in Kg).
4.
The identification code of the appliance.
5. The serial number of the appliance.
6. The name of the appliance.
7.
The nominal power consumed by the appliance (expressed in W).
8.
The maximum grade that the appliance can handle during work activities (expressed in %).
9. The year in which the appliance was manufactured.
10.
The nominal voltage of the appliance (expressed in V).
11.
The commercial name of the appliance and the manufacturer's address.
11
10
9
8
7
6
1
2
3
4
5
TECHNICAL DATA (INTERNATIONAL SYSTEM)
U/M
OPTIMA 90BS
Rated power
W
3340
Working width
mm
870
Squeegee width
mm
1120
Working capacity, up to
m
2
/h
6960
Diameter and width of front brush
Ø mm x mm
150 x 855
Diameter and width of rear brush
Ø mm x mm
210 x 865
Front brush rotations
rpm
810
Rear brush rotations
rpm
590
Electrical characteristics of the brush motor
V/W
24 / 1500
Maximum weight of the brushes
kg
86
Electrical characteristics of the traction motor
V/W
24 / 1000
Maximum forward speed
Km/h
8
Maximum gradient with full load
%
10
Electrical characteristics of the vacuum motor
V/W
24 / 420
Suction vacuum (hole Ø0)
mbar
85
Solution tank volume
l
156
Recovery tank volume
l
138
Detergent tank volume (version with dosing system only)
l
5
Debris hopper volume
l
10
Turning circle
mm
1010
Maximum machine length (without bumper kit)
mm
1796
Maximum machine height (without roof)
mm
1005
Maximum machine width (without squeegee)
mm
900
Battery Compartment Dimensions (Length x Width x Height)
mm
430x630x470
Rated battery voltage
V
24
Battery hopper weight
kg
238
Machine weight
kg
363
Transported machine weight
kg
620
Machine weight in running order
kg
895
Sound pressure level (ISO 11201)
dB (A)
65.4
Uncertainty Kp
A
dB (A)
1.5
Body vibration level
m/s
2
< 0.5
SPECIAL EQUIPMENT
Each design is created with the aim of giving the customer a new reason to choose Comac spa products, this type of scrubbing machines in particular can be equipped with the following devices:
•
ECO-MODE
: a device that decreases the noise level and lowers energy consumption.
The paragraphs in the document that talk about the following equipment will have the wording “ECO-MODE”.
•
COMAC DOSING SYSTEM
: this is the dosing system for the separate management of water and detergent, and allows you to increase or reduce the delivery depending on the dirt to be treated.
The paragraphs in the document that talk about the following equipment will have the wording “CDS”.
•
PRESSURE MONITORING
: a system that monitors the power dispensed by the brush motors in order to guarantee maximum effectiveness on any type of floor.
The paragraphs in the document that talk about the following equipment will have the wording “PM”.
•
COMAC FLEET CARE
: system that allows the remote control of machines status: if, when and where each machine is operating or if maintenance is needed, to let you promptly intervene avoiding machine
downtimes and unexpected costs for extraordinary maintenance.
13
