Page 9 of 28
INSTRUCTION MANUAL
CLCI-100
BULK CURRENT INJECTION PROBE
with
FCLC-100
CALIBRATION FIXTURE
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV051917
3.4.2
Description of FCLC-100 Calibration Fixture Features
FIGURE 2 -
FCLC-100 Calibration Fixture Features
Fixture Opening
1
The CLCI-100 is installed within this opening so that the center conductor rod of the fixture
passes through the approximate center of the probe aperture.
Center Conductor Rod
2
This is the fixture’s center conductor.
Calibration Fixture Coaxial Ports
3
These are female N-type coaxial connectors providing input/output connections to the
fixture.
Thumb Screws for Removable Top Plate
4
These (6) screws secure the fixture’s top plate to the fixture assembly.
Removable Top Plate of Fixture
5
In order to install/remove the clamp into/from the calibration fixture, the top plate must be
removed by removing the six (6) thumb screws. The top cover and thumb screws must be
replaced prior to the performance of tests.
2
3
4
1
3
5
FCLC-100
www.com-power.com
4
4
4
4
4
3
3
All manuals and user guides at all-guides.com
