Page
13 of 15
MANUAL_ACS-230-50W Rev. M02.15
Displayed indications and their meanings:
Driver1 = Driver1 Current/Temperature (Line 1, columns 1/2 on LCD)
Driver2 = Driver2 Current/Temperature (Line 2, columns 1/2 on LCD)
PA = PA Module Current/Temperature (Line 3, columns 1/2 on LCD)
PS
= Power Supply status (Line 4 on LCD)
Prev = Reflected Power sensed at the RF output
(Line 1, column 3 on LCD)
Pin = Input Power to the unit (Line 2, column 3 on LCD)
Pout = Output Power of the unit (Line 3, column 3 on LCD)
Gain = Gain of the unit (Line 4, column 3 on LCD)
5.
Before switching off the power from the front panel, make sure the RF output is
reduced to a safe level (-50 dBm) or completely disabled.
6.
In the event of any fault occurring, the unit will automatically shut down.
