Page
12 of 15
MANUAL_ACS-230-50W Rev. M02.15
3.
Turn on switch from the front panel as shown in picture.
Upon successful completion of the self test mode the LCD screen will display the
Driver 1 & 2 Current/Temperature, Module Current/Temperature and System
Status.
Please note that Pin, Pout, SWR and Gain will not be displayed until the amplifier sees
an input of -45dBm.
4.
When the RF input is applied (in excess of -40 dBm), the front panel LCD displays
the actual measured values for Pin, Pout, SWR, and Gain. The current and
temperature status of PA and Driver is always displayed regardless of the input
state.
