Page 7 of 28
INSTRUCTION MANUAL
LI-3P-2x Series
3-PHASE LINE IMPEDANCE STABILIZATION NETWORKS (LISNs)
SECTI ON 3 -
PRODUCT INFORMATION
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV031418
3.3 Product
Safety
Information
3.3.1
Product Hazard Symbols Definitions
The hazard symbols appearing on the product exterior are defined below.
The yellow triangle with an exclamation mark indicates the presence of
important operating and/or maintenance (servicing) instructions in the
literature accompanying the product.
The yellow triangle with a lightning bolt indicates an alert to the user
that uninsulated
dangerous voltages
are present within the product
enclosure and on output connectors. These voltages may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The Ground symbol inside a circle indicates terminal which is intended
for connection to an external conductor for protection against electric
shock in case of a fault, or the terminal of a protective earth (ground)
electrode.
To indicate on the rating plate that the equipment is suitable for AC
current.
To indicate on the rating plate that the equipment is suitable for direct
current.
3.3.2
Product Warning/Caution Statements
The following warnings/caution statements must be adhered to in order to
ensure safe operation of the product.
WARNING: HIGH VOLTAGE!
CONNECT PROTECTIVE EARTH BEFORE APPLYING POWER!
VERIFY INPUT POWER CONFIGURATION PRIOR TO MAKING CONNECTION.
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT OPEN COVER. CONNECT
PROTECTIVE EARTH BEFORE APPLYING POWER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
TO AVOID OVERHEATING, OPERATE FANS DURING USAGE.
(applies only to LI-3P-263 and LI-3P-2100)
