Columbus E 400 S Duo Speed Operating Manual Download Page 6

                                     Single brush machines 
                                      E 400 S Duo Speed  
 
                          

 

2.4 Work safety 

Danger to persons and/or the equipment can be avoided by following the work safety instructions. 

Non-observance of these instructions can put people or objects at risk through mechanical or electrical factors 
or through the equipment breaking down. 

Non-observance of the safety regulations will result in the loss of any right to claim for damage. 

 

2.5 Protective clothing 

When working on and with the appliance the following must be worn: 

– 

Solid closed shoes with non-skid soles 

 

– 

Close-fitting working clothes (resistant to tearing, no wide sleeves, no rings or other jewellery, etc.) 

 

2.6 Dangers resulting from the equipment 

The appliance has undergone a risk assessment. The design and layout of the equipment resulting from this  
corresponds to the current state-of-the-art. 

However, a certain residual risk always remains! 

 

The appliance needs to be used responsibly and carefully. Improper use or use by unauthorized persons can 
endanger other people. 

 

  WARNING! Risk of injury! 

Improper use of the equipment can cause serious injuries through crushing, running over or con-
tacting people with the rotating brushes, pad holder. Thus the following rules should be observe: 

– 

The appliance may not be used on floors with an inclination of more than 10%. 

– 

Move the appliance cautiously, taking care to avoid other people and objects in the vicinity. 

– 

When working with the appliance never put other people at risk. 

– 

When working, ensure that other people – especially children – never come into contact with 
the appliance. 

– 

Unauthorized persons should not have access to the appliance. 

 

  ATTENTION! 

Improper use can cause considerable damage to the appliance, floor covering as well as  other 
objects. When using the appliance, never run over thresholds, steps, carpets or objects which 
could get caught, such as cables. 

 

The friction of the brush on the floor aids the forward motion of the appliance. When the appliance is switched 
on, it may move forward by itself in any direction. 

 

  WARNING! Risk of injury! 

The uncontrolled forward motion of the appliance can cause serious injuries through crushing, 
running over or falling over. Thus the following rules should be observed: 

– 

Never let go of the handle when the machine is running. 

– 

Before leaving go of the handle, always first switch off the machine.  

– 

Never switch on the machine with the guide bar in a vertical position.  

– 

Always guide the machine with both hands. 

 

The appliance is equipped with a rotating brush or a pad holder. 

 

Summary of Contents for E 400 S Duo Speed

























Reviews: