Single brush machines
E 400 S Duo Speed
15
7 Operation
WARNING! Risk of injury!
The appliance may put people and objects at risk. Work on and with the appliance may only be
carried out by properly qualified personnel in accordance with all the safety instructions given in
the Chapter "Safety"!
Every operator must first read through the whole operating manual – especially all the instruc-
tions in the chapter on "Safety" – and have understood it before operating the appliance.
WARNING! Danger of electric shock!
Make sure that the electrical connection values are consistent with those on the type plate of the
appliance. The single brush machine must only be used on appropriately fused electric circuits.
7.1 Tasks before starting cleaning
7.1.1 Checks before starting
ATTENTION!
The appliance must be in proper working order, otherwise the
appliance or the floor surface to be cleaned may be damaged or
ruined.
Therefore carry out the following checks before starting work:
1. Visual inspection of the appliance for damage or missing parts.
2. Check that all the operating controls are working properly.
3. Check the cleaning tool is working properly
7.1.2 Selecting the equipment
Equip the single brush machine according to the work to be carried out:
•
Scrubbing: For scrubbing, a scrubbing brush (or a pad holder
with pad) is required.
We also recommend to use the columbus fluid tank (see Chapter
„Assembling the accessories“).
•
Polishing: For polishing, a polishing brush (or a pad holder with
polishing pad) is required.
We also recommend vacuuming the floor surface with the vac unit
(See Chapter “Assembling the accessories”).
•
Cleaning: For cleaning, a pad holder with polishing pad and
spray unit is required (Chapter “Assembling the accessories”).
•
Shampooing (only with low speed): For shampooing, a sham-
poo brush and the fluid tank is required (Chapter “Assembling the
accessories”).
NOTE!
To make the shampoo brush more supple, it should be
soaked in clear water for about half an hour before use.