13
S
ection
3 — A
SSembly
& S
et
-U
p
4.
Remove wing nut (a) from axle bolt (b). Slide axle bolt from
the assembly and select a cutting height.
5.
Reinsert axle bolt in the square hole desired through wheel
assembly and secure w
ith wing nut removed in Step 1.
IMPORTANT:
All wheels must be placed in the same
relative position. For rough or uneven lawns, move the
height adjustment lever to a higher position. This will stop
scalping of grass.
The casters can be locked in a straight ahead position or
positioned to swivel freely. See Figure 3-17.
Figure 3-17
1.
Lift lock pins.
2.
Place in larger holes to lock wheels. Place pins in smaller
holes to allow casters to rotate freely for turning.
Set-Up
Gas and Oil Fill-Up
Refer to the separate engine owner’s manual for additional
engine information.
1.
Add oil provided before starting unit for the first time out
of the box.
2.
Service the engine with gasoline as instructed in the
separate engine owner’s manual.
WARNING:
Use extreme care when handling
gasoline. Gasoline is extremely flammable and the
vapors are explosive. Never fuel the machine
indoors or while the engine is hot or running.
Extinguish cigarettes, cigars, pipes and other
sources of ignition.
3.
Charge battery as instructed in the Service section of this
manual (Electric Start Models Only).
Summary of Contents for 12ABW32G897
Page 28: ...28 Notes ...
